01.檢驗外觀設計

01. Inspection of appearance design

手板是驗證產品設計的重要方法。外觀手板能直觀進行評審，它可以很直觀地以實物的形式，把設計師的創意反映并生產出來，避免了“畫出來好看而做出來不好看”的弊端。

A prototype is an important method for verifying product design. The appearance prototype can be visually evaluated, and it can reflect and produce the designer's creativity in the form of physical objects, avoiding the disadvantage of "drawing looks good but making looks bad".

因此手板制作在新品設計開發，產品結構外形推敲的過程中是非常重要的一環。

Therefore, prototype production is a very important part in the process of new product design and development, as well as the refinement of product structure and appearance.

02.檢驗結構設計

02. Inspection of structural design

另外，結構手板在產品裝配工藝、模具制造工藝和生產工藝合理性分析和評價中起著非常直接的作用，手板是可裝配的，可以直觀地反映結構的合理性和安裝的方便性。便于及早發現問題，解決問題。

In addition, the structural prototype plays a very direct role in the analysis and evaluation of product assembly process, mold manufacturing process, and production process rationality. The prototype can be assembled, which can intuitively reflect the rationality of the structure and the convenience of installation. Facilitate early detection and resolution of issues.

03.避免有直接開模的風險

03. Avoid the risk of direct mold opening

避免直接開模具的風險性：由于模具制造的費用一般很高，比較大的模具價值數十萬乃幾百萬，如果在開模具的過程中發現結構不合理或其他問題，其損失可想而知。

Avoiding the risk of direct mold opening: Due to the high cost of mold manufacturing, larger molds are worth hundreds of thousands or even millions of dollars. If unreasonable structures or other problems are found during the mold opening process, the losses can be imagined.

而熒爍可制造各種手板樣品，提前驗證產品，降低開模具風險，從而減少企業損失。

And Yingshuo can manufacture various prototype samples, verify products in advance, reduce the risk of mold opening, and thus reduce enterprise losses.

04.縮短產品面世時間

04. Shorten product launch time

由于手板制作的超前性，你可以在模具開發出來之前，利用手板作為產品進行宣傳，甚前期的生產銷售準備工作，幫助企業可以及早的占領市場。

Due to the advanced nature of prototype production, you can use the prototype as a product for promotion before the mold is developed, and even prepare for production and sales in the early stage, helping the enterprise to occupy the market early.

本文由濟南手板整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊:http://www.ymk114.com我們會有更多精彩內容等你查看

This article is compiled and published by Jinan Shouban. Do you have any understanding of these contents? For more information, please click on: http://www.ymk114.com We will have more exciting content waiting for you to view