Transparent materials are widely used, and various objects are very common in modern life. The use of transparent materials in cars, airplanes and satellites is somewhat magical and necessary. The following details how to make a transparent handlebar.

如何制作透明的手牌?答案自然是用透明材料做手牌，透明的手牌在手牌制作中也較多。所以透明的產品也很多，透明質地的產品在現代生活中也很常見，廚房家電手牌、汽車大燈手牌、玩具手牌、眼鏡鏡片等。透明手板的生產主要采用兩種材料，一種是PC材料，一種是PMMA材料。與PMMA手板相比，PC具有更高的硬度，而PMMA材料是制作手板的較好的材料，比PC手板模型更容易打磨和打磨。下面簡要介紹PC和PMMA透明材料的性能。

How to make a transparent hand? The answer is naturally to use transparent materials to make a hand, and transparent hands are more often used in hand making. So there are many transparent products, transparent texture products are also very common in modern life, such as kitchen appliances, car headlights, toys, glasses, etc. There are two main materials used in the production of transparent handboards, one is PC material and the other is PMMA material. Compared with PMMA hand board, PC has higher hardness, and PMMA material is a better material for making hand board, which is easier to polish and polish than PC hand board model. The following is a brief introduction to the properties of PC and PMMA transparent materials.

因為PC的質量比較硬，后期打磨時間比較長，PC手板死角甚無法打磨。和PMMA材料在打磨和拋光方面要容易得多,PC材料的板手也不完全透明,有一種光淡紫色是朦朧的感覺,這種淡紫色可以使用化學藥品使其成為透明一些,這其中產生化學變化。PMMA材料透光率可達90%以上;它是一種理想的透明材料。

Because the quality of PC is relatively hard and the polishing time is relatively long in the later stage, the dead angle of PC hand board can not even be polished. And PMMA materials are much easier to polish and polish. PC materials are not completely transparent. There is a feeling that light lavender is hazy. This lavender can be made transparent by using chemicals, which produces chemical changes. The transmittance of PMMA material can reach more than 90%. It is an ideal transparent material.

客戶在選擇材料時應考慮這些材料的特性。如果產品本身的生產材料是PMMA，那么手工制作的材料更好是PMMA材料。如果產品的生產材料是PC，那么在做板的時候，就要考慮PMMA板對檢測產品是否有影響。當然，我們也應該考慮到困難拋光和PC材料拋光對模型的影響。

Customers should consider the characteristics of these materials when selecting them. If the production material of the product itself is PMMA, the manual material is better to be PMMA. If the production material of the product is PC, when making the board, it is necessary to consider whether PMMA board has an impact on the test product. Of course, we should also consider the influence of difficult polishing and PC material polishing on the model.